Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
lippy  
#1 Posted : Thursday, June 27, 2013 9:33:54 AM(UTC)
lippy

Rank: Member

Groups: Registered
Joined: 6/27/2013(UTC)
Posts: 2

Does anyone have any information on the wiring for a Hobart manufactured for KitchenAid K45 stand mixer? This is a pre-KitchenAid built…pre-solid state design. Even a photo with the back cover removed would help.

I took the thing apart to replace the power cord and did not take notes on the wiring. There is no diagram or schematic on the internet that I was able to find.


Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
lippy  
#2 Posted : Saturday, July 20, 2013 8:58:02 AM(UTC)
lippy

Rank: Member

Groups: Registered
Joined: 6/27/2013(UTC)
Posts: 2

15+ days; 300+ views and nothing...about what I was able to find on the web.

I have a Plan B *cringe*: buy one on FleaBay and dissect it. But then I will have two.:p
csawy  
#3 Posted : Thursday, October 31, 2013 7:14:58 PM(UTC)
csawy

Rank: Member

Groups: Registered
Joined: 10/31/2013(UTC)
Posts: 1

This is what you are looking for - took me four hours to find it on the internet. I am not altruistic per se, I am replacing a line cord also. All of the instructions out and about are for the very inferior K45ss. This should take care of you. Have fun.
Kitchen Aid K45 Service Manual (For Hobart Made Vintage Mixers)
sky5031  
#4 Posted : Thursday, February 5, 2015 8:53:14 PM(UTC)
sky5031

Rank: Member

Groups: Registered
Joined: 2/5/2015(UTC)
Posts: 1

hope this will help the forum it from a 5/67 service manual on the Hobart k45
its there version of a schematic
sky5031 attached the following image(s):
13-37ba31b6ad.jpg
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.