Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
pro69  
#1 Posted : Wednesday, August 6, 2014 5:38:23 PM(UTC)
pro69

Rank: Member

Groups: Registered
Joined: 8/6/2014(UTC)
Posts: 2

I have an approx. 7 yr old Frigidaire front loader elec dryer. I think the model is Affinity, that's what's on the front door anyway. The problem with it is when you set the time on it, say for 50 min, it beeps at 20 min, and the beeps are louder than they used to be, It seems to work normal other than that. Basically the timer isn't timing correctly and the finished beeper seems louder than normal. What can I do to fix it, etc. Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
mjdemaris  
#2 Posted : Sunday, October 26, 2014 2:56:18 PM(UTC)
mjdemaris

Rank: Member

Groups: Registered
Joined: 7/17/2009(UTC)
Posts: 9

I see your post has not been answered yet. I do not have a solid answer, yet, though I am thinking it may be the control board.
But, I too have this problem and am searching...just wanted to bump this thread to get it some more attention.

Did your problem come after you replaced other components?

Mine did, after I replaced the upper felt and heating element.

Don't think there's any connection, though.
pro69  
#3 Posted : Wednesday, October 29, 2014 4:26:05 PM(UTC)
pro69

Rank: Member

Groups: Registered
Joined: 8/6/2014(UTC)
Posts: 2

Haven't replaced anything. It just started doing it on it's own. Took apart the entire lint trap and area below it and thoroughly cleaned everything and cleaned vent hose and checked for restrictions and everything was good.
mjdemaris  
#4 Posted : Wednesday, October 29, 2014 6:25:31 PM(UTC)
mjdemaris

Rank: Member

Groups: Registered
Joined: 7/17/2009(UTC)
Posts: 9

In your case, it might be the control board. Did you find a lot of lint in the cabinet area? If yours developed a lint leak, like mine did, lint would coat everything outside the drum, possibly causing overheating or a short.
Users browsing this topic
Guest (2)
Similar Topics
frigidaire dryer help (Dryer Repair)
by steve thompson 11/26/2010 12:39:50 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.