Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
Does my Maytag have a defrost timer or adaptive defrost control? Where is it?
Options
Go to last post Go to first unread
Model: MSD2351HEB Brand: Maytag Age: 1 - 5 years
Previous Topic Next Topic
Momto8  
#1 Posted : Wednesday, May 6, 2009 11:56:41 AM(UTC)
Momto8

Rank: Member

Groups: Registered
Joined: 3/23/2009(UTC)
Posts: 10
I have a Maytag MSD2351HEB. It will be 2 years old in August. I read the post about a faulty defrost system, but then I read other posts about having an adaptive defrost control...so now I'm confused. The freezer still seems cold enough, but the fridge is not. There is frost on the back wall of the freezer. What and how do I check this??? Please help...(and speak in layman's terms, please). I've got 8 kids and 6 gallons of milk depending on me...lol :o

Brandy
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
woodchuckie  
#2 Posted : Wednesday, May 6, 2009 1:07:21 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
Originally Posted by: Momto8 Go to Quoted Post
I have a Maytag MSD2351HEB. It will be 2 years old in August. I read the post about a faulty defrost system, but then I read other posts about having an adaptive defrost control...so now I'm confused. The freezer still seems cold enough, but the fridge is not. There is frost on the back wall of the freezer. What and how do I check this??? Please help...(and speak in layman's terms, please). I've got 8 kids and 6 gallons of milk depending on me...lol :o

Brandy


To save your milk, first take the back cover in the freezer off and melt the ice with a hair dryer. That will give you a few days to find your problem and fix it.

Check the defrost heater and defrost thermostat first. Your user manual or the tech manual behind the kick panel at the floor on the front may tell how to test these parts, also See how and where here. Refrigerator Repair Guide: How To Fix a Refrigerator - ACME HOW TO.com

If those parts are ok you problem is the adaptive defrost control. Part 12 on the diagram of your controls here. Replacement parts for MAYTAG MSD2351HEB | AppliancePartsPros.com
Back to top
Momto8  
#3 Posted : Wednesday, May 6, 2009 3:02:27 PM(UTC)
Momto8

Rank: Member

Groups: Registered
Joined: 3/23/2009(UTC)
Posts: 10
I'm not following where the defrost thermostat and defrost heater are located....I know where the adaptive defrost control is. It is in the control panel on the refrigerator side...but where are the other 2?
Back to top
woodchuckie  
#4 Posted : Wednesday, May 6, 2009 3:22:00 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
Remove the back inside of the freezer. You'll see the iced up coils. The thermostat is clamped to the coils. The heater is under or woven thru the coils.

Part 3 and 7 on diagram 6. Replacement parts for MAYTAG MSD2351HEB | AppliancePartsPros.com
Back to top
Momto8  
#5 Posted : Wednesday, May 6, 2009 3:40:56 PM(UTC)
Momto8

Rank: Member

Groups: Registered
Joined: 3/23/2009(UTC)
Posts: 10
I've defrosted the coils w/ a hair dryer. I unclamped the thermostat but do not see a way to test it with a continuity tester..? I tested the heater with a continuity tester and got nothing. My husband also tested the capacitator on the compressor with the continuity tester and nothing on it either. Should the capacitator show anything on the continuity tester? And is there anyway to test the thermostat w/o cutting the wires. The wires are harnessed in with a bunch of other wires and go into the back of the freezer where I can't see them.
Back to top
woodchuckie  
#6 Posted : Wednesday, May 6, 2009 5:32:20 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
I don't know of a way if the manual doesn't tell. I would turn the power off and cut the wires. you can twist them back together with a connector.

You shouldn't be messing with the capacitor. It's involved with the compressor.

If you didn't get anything on the heater then it's bad.
Back to top
Momto8  
#7 Posted : Monday, June 15, 2009 11:49:52 AM(UTC)
Momto8

Rank: Member

Groups: Registered
Joined: 3/23/2009(UTC)
Posts: 10
I replaced the defrost heater a little over a month ago and it has been working great since then....that is, until yesterday. I noticed the fridge wasn't quite as cold as it had been. I checked inside the back of the freezer and yep...frosting over again...I thawed it all w/ a hair dryer...but it is steadily frosting back over....What next?
Back to top
woodchuckie  
#8 Posted : Monday, June 15, 2009 3:56:28 PM(UTC)
woodchuckie

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/10/2009(UTC)
Posts: 1,363
The defrost system consists of the three parts discussed in earlier in this thread. One could have gone bad again or the adaptive defrost control could be acting up and not working all the time.
Back to top
MBZ  
#9 Posted : Tuesday, June 16, 2009 2:01:41 PM(UTC)
MBZ

Rank: Member

Groups: Registered
Joined: 6/16/2009(UTC)
Posts: 2
I had the same problem with my maytag, had to replace the auto defrost unit , a little printed circut board. All working fine since replacment.
Back to top
msanchuk  
#10 Posted : Tuesday, March 20, 2012 8:37:51 PM(UTC)
msanchuk

Rank: Member

Groups: Registered
Joined: 3/16/2012(UTC)
Posts: 3
anyone know how to tell me what to do to initiate the adaptive defrost without waiting for the time to elapse?
Back to top
Users browsing this topic
Guest (8)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET