Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
hnsnyder  
#1 Posted : Wednesday, November 27, 2013 11:23:22 AM(UTC)
hnsnyder

Rank: Member

Groups: Registered
Joined: 11/27/2013(UTC)
Posts: 2

Serial#: 065201460714

This dishwasher had been in a basement that had a small amount of flooding. I tested it the other day to see if it would work. It started the cycle and water pumped in, but then stopped and the "Light China" light began flashing.

Searching online, I found this for the flashing code:
"Light china" (the wine glass) flashes - A fault with the water inlet. Make sure the water valve is open.

However, water filling into the bottom of the dishwasher, so there doesn't seem to be a problem with water coming in.

What should be my next step to seek to repair?

Thank you!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
VikTech  
#2 Posted : Monday, December 2, 2013 5:14:16 PM(UTC)
VikTech

Rank: Member

Groups: Registered
Joined: 11/1/2012(UTC)
Posts: 33

The inlet valve fault is telling you the flow meter on the valve did not recognize water passing through the valve. The unit is time filled so even if no flow is detected it will remain energized allowing water through. Probably needs a new inlet valve.

Take a look at the control before ordering parts. Remove door and console. Pry open plastic covering and check for burn marks. If there was a flood and the underside was submerged it likely caused more damage than is worth repairing, for cost reasons. If diverted was shorted and burned up board scrap the unit and replace it.
hnsnyder  
#3 Posted : Tuesday, December 3, 2013 11:00:34 AM(UTC)
hnsnyder

Rank: Member

Groups: Registered
Joined: 11/27/2013(UTC)
Posts: 2

Thank you - I will check that soon - hopefully this weekend. Cheers!
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.