Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE frontload washer pauses randomly and will not wash or spin
Options
Go to last post Go to first unread
Model: WCVH6260 Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
sew  
#1 Posted : Friday, July 24, 2009 5:37:13 AM(UTC)
sew

Rank: Member

Groups: Registered
Joined: 7/24/2009(UTC)
Posts: 2
The washer turns on and acts like it is working. It begins its usual tumble-lock-unlock-lock-begins to dispense water but stops short. Then it will pause itself. I unpause it, it may tumble once-then nothing-then pause itself. The timer continues to run. What is wrong?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sidfink43  
#2 Posted : Sunday, July 26, 2009 5:32:50 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Hi Sew

Take off the front lower panel and you will find some tech sheets in there which will take you through a troubleshooting/diagnosis routine.

You may not find anything wrong from this, in which case I suspect the problem is in your door latch/lock assembly, but this is only suspicion on my part based on experience with these machines. If you cannot determine any other problems you may want to replace the door lock assembly as a good possiblity, but you will not be certain that will fix it.

Good luck, let us know what you find out.
Back to top
sew  
#3 Posted : Wednesday, August 5, 2009 3:11:07 PM(UTC)
sew

Rank: Member

Groups: Registered
Joined: 7/24/2009(UTC)
Posts: 2
The spec sheets were not there. Is there anywhere else I can get these? We son't want to replace the control panel if that is not the issue.
Back to top
sidfink43  
#4 Posted : Wednesday, August 5, 2009 3:47:51 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Here is the service manual for your machine. It will show you how to enter the test mode and trouble shoot the machine.

http://appliancejunk.com/ge/washer/31-9135.pdf

Hopefully this will give you some guidance.

Good luck.
Back to top
relder327  
#5 Posted : Monday, September 27, 2010 10:42:26 PM(UTC)
relder327

Rank: Member

Groups: Registered
Joined: 9/27/2010(UTC)
Posts: 1
Wanted to thank you for the tech manual,I am a toyota tech and knew I could fix the washer if I had a tech manual and yours helped greatly.I had the same problem of it not washing after start and timer going down and found that the water valve was not filling with hot water.I went through the test ,as in the manual , and found the hot water was not filling up.I started a load in cold and it ran fine.I just wanted to say thanks for the manual.
Rich
Back to top
sidfink43  
#6 Posted : Tuesday, September 28, 2010 3:36:34 AM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
Glad we could help, and thanks for thanking us.
Back to top
Keithhoffman22  
#7 Posted : Wednesday, September 25, 2013 2:44:22 PM(UTC)
Keithhoffman22

Rank: Member

Groups: Registered
Joined: 9/25/2013(UTC)
Posts: 2
The old link above did not work. Looking to address lock unlock pause issue. The pump filter was clogged but cleaning it didnt resolve the issue. Thank you!
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET