Frigidaire Gas Range/Oven Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: FJF337AWJ	Brand: Frigidaire	Age: 5 - 10 years
Previous Topic Next Topic

beebem97		#1 Posted : Friday, August 16, 2013 2:28:34 PM(UTC)
Rank: Member Groups: Registered Joined: 8/16/2013(UTC) Posts: 5		I followed the instructions that came with the LP conversion kit to the letter. Top burners work fine. The ignitor for the oven glows but the burner never lights. I believe all air is out of the lines as it took a few moments for each burner to light but they finally did. I don't hear any gas/air release coming from the oven burner nor do I smell any LP. HELP?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

HumboldtRepairMan		#2 Posted : Friday, August 16, 2013 4:13:35 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		Did you change the regulator or orfice in it? Here's a video to help https://www.youtube.com/watch?v=4fk8V6Mf9Vc
User Profile View All Posts by User View Thanks

beebem97		#3 Posted : Saturday, August 17, 2013 4:19:42 AM(UTC)
Rank: Member Groups: Registered Joined: 8/16/2013(UTC) Posts: 5		Flipped The regulator Cap To The Lp Position (Solid In, Hollow Out) And Reinstalled Per Instructions. Then Turned The Oven Burner Spud Down To The Lp Position As Instructed. Igniter Flows But No Evidence Of Gas Coming Out Of Burner When Turned On.
User Profile View All Posts by User View Thanks

HumboldtRepairMan		#4 Posted : Saturday, August 17, 2013 8:24:52 AM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		Check to make sure you have 120v going to the ignitor from the main board when pressing bake. Could be the ignitor is going bad, check it with an amp clamp it needs to pull at least 3 amps to release the safety valve. It may also have a safety valve issue perhaps.......
User Profile View All Posts by User View Thanks

beebem97		#5 Posted : Saturday, August 17, 2013 8:31:23 AM(UTC)
Rank: Member Groups: Registered Joined: 8/16/2013(UTC) Posts: 5		Originally Posted by: HumboldtRepairMan Check to make sure you have 120v going to the ignitor from the main board when pressing bake. Could be the ignitor is going bad, check it with an amp clamp it needs to pull at least 3 amps to release the safety valve. It may also have a safety valve issue perhaps....... Will check that. Thanks a gob! This gives me some direction.:eek:
User Profile View All Posts by User View Thanks

beebem97		#6 Posted : Wednesday, August 21, 2013 12:39:40 PM(UTC)
Rank: Member Groups: Registered Joined: 8/16/2013(UTC) Posts: 5		Originally Posted by: beebem97 Will check that. Thanks a gob! This gives me some direction.:eek: Checked igniter, I am getting 120v at the plug and there are no fault codes on the display panel yet the oven burner still doesn't light.
User Profile View All Posts by User View Thanks

HumboldtRepairMan		#7 Posted : Wednesday, August 21, 2013 3:59:32 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		120v at the ignitor when you put it in bake mode..........not the wall plug.
User Profile View All Posts by User View Thanks

beebem97		#8 Posted : Wednesday, August 21, 2013 4:05:02 PM(UTC)
Rank: Member Groups: Registered Joined: 8/16/2013(UTC) Posts: 5		Originally Posted by: HumboldtRepairMan 120v at the ignitor when you put it in bake mode..........not the wall plug. Yes sir. Had it in bake mode.
User Profile View All Posts by User View Thanks

HumboldtRepairMan		#9 Posted : Wednesday, August 21, 2013 4:10:56 PM(UTC)
Rank: Member Groups: Registered Joined: 7/16/2013(UTC) Posts: 916		If you have 120v at the bake ignitor and its not glowing or pulling 3amps you have a bad ignitor.
User Profile View All Posts by User View Thanks

jeremey		#10 Posted : Wednesday, August 21, 2013 4:29:46 PM(UTC)
Rank: Member Groups: Registered Joined: 8/21/2013(UTC) Posts: 3		Still cannot get the door on, the holes do not line up with anything. One manual we found said to put the packing pins in the hinge when removing the door. Number one:we do not have any pins; number two the door is off now. I wonder if this an old, old oven although I have checked and rechecked the model number and it is correct. Help! Thank you:confused:
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (7)