Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
2WHIRLPOOLSCLW  
#1 Posted : Sunday, May 26, 2013 4:57:28 PM(UTC)
2WHIRLPOOLSCLW

Rank: Member

Groups: Registered
Joined: 5/26/2013(UTC)
Posts: 1

Whirlpool washer leaks water on the floor at bottom,front center of machine when filling tub with water (cold and hot). Appears to be dripping or running down inside the front panel of machine. This started after I had machine on it's back to replace the clutch assembly.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sidfink43  
#2 Posted : Tuesday, May 28, 2013 4:43:57 PM(UTC)
sidfink43

Rank: Advanced Member

Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699

Take off the cabinet and start up the machine. You should be able to see where the leak is coming from. My guess is that you may have dislodged the pressure switch tube., but watching it while it fills or empties should locate the problem.
Sawfish  
#3 Posted : Wednesday, May 29, 2013 7:42:05 AM(UTC)
Sawfish

Rank: Member

Groups: Registered
Joined: 5/30/2009(UTC)
Posts: 10

Originally Posted by: sidfink43 Go to Quoted Post
Take off the cabinet and start up the machine. You should be able to see where the leak is coming from. My guess is that you may have dislodged the pressure switch tube., but watching it while it fills or empties should locate the problem.


Check the splash guard to be sure it is in place, and is not causing splash back from the water inlet.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.