microwave transformer schematic Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: UMC5200BAS	Brand: Maytag	Age: 5 - 10 years
Previous Topic Next Topic

rjreed		#1 Posted : Wednesday, February 13, 2013 12:24:49 PM(UTC)
Rank: Member Groups: Registered Joined: 2/13/2013(UTC) Posts: 4		i screwed up in checking power to the transformer and didn't mark which wire went to which input terminal on the transformer. One is black and the other is red. Any help in determining the proper location would be appreciated.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Wednesday, February 13, 2013 1:17:41 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. If you are talking about the primary windig on the left (see the picture) then it really doesn't metter which wire goes where, because it's 120VAC. The transformer Part number: DE26-00061B Here are the breakdown diagrams and 03-Internal Controls / Latch Asy. / Base parts for Maytag UMC5200BAS - AppliancePartsPros.com Simon.
User Profile View All Posts by User View Thanks

rjreed		#3 Posted : Wednesday, February 13, 2013 2:10:25 PM(UTC)
Rank: Member Groups: Registered Joined: 2/13/2013(UTC) Posts: 4		thanks. i blew the 20 amp fuse after checking it out and assumed i had the wires crossed.
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Wednesday, February 13, 2013 2:25:23 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are welcome. Simon.
User Profile View All Posts by User View Thanks

rjreed		#5 Posted : Wednesday, February 13, 2013 4:14:33 PM(UTC)
Rank: Member Groups: Registered Joined: 2/13/2013(UTC) Posts: 4		ended up being the transformer blowing the fuse. replaced it and all is well again.
User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Wednesday, February 13, 2013 4:30:25 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Congratulations on the successful job. Thank you for shearing with us useful info. Simon.
User Profile View All Posts by User View Thanks

rjreed		#7 Posted : Wednesday, February 13, 2013 6:50:05 PM(UTC)
Rank: Member Groups: Registered Joined: 2/13/2013(UTC) Posts: 4		i appreciate the forum and the help you all provide to us D.I.Y.'ers. Thx again!
User Profile View All Posts by User View Thanks

Simon / APP Team		#8 Posted : Thursday, February 14, 2013 9:59:19 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		You are very welcome. Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (6)