Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
22 Pages«<1819202122>
GE refrigerators (GS* & PS* models), the evaporator fan motor test and replacement.
Options
Go to last post Go to first unread
Brand: GE Age: Less than 1 year
Previous Topic Next Topic
Gene  
#191 Posted : Thursday, January 31, 2013 12:41:26 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. But I do not think the voltage over 13 VDC is a good reading. You may want to check it at the control board too.

Gene.
Back to top
freddyrick  
#192 Posted : Monday, February 4, 2013 4:51:03 AM(UTC)
freddyrick

Rank: Member

Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 16
Originally Posted by: Gene Go to Quoted Post
You are welcome. But I do not think the voltage over 13 VDC is a good reading. You may want to check it at the control board too.

Gene, you are correct and thank you. The voltage output at R and Y was up to 19.5vdc. I bought a new motor, but instead of installing it, I tested the resistance and it read the same as the old motor, although each reading was polarity specific. I got two different readings on R/W at the new motor when I reversed polarity of the ohmmeter. Why is this? Also, the old motor still runs for a couple of seconds when first plugged in. So, I'm guessing its the motherboard. Wish I knew better how to test the motherboard before buying a new one.
Back to top
Gene  
#193 Posted : Monday, February 4, 2013 10:04:24 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: freddyrick Go to Quoted Post
Originally Posted by: Gene Go to Quoted Post
...although each reading was polarity specific. I got two different readings on R/W at the new motor when I reversed polarity of the ohmmeter...


I never heard about such things. Check how is your ohmmeter set.

Gene.
Back to top
freddyrick  
#194 Posted : Monday, February 11, 2013 4:34:05 AM(UTC)
freddyrick

Rank: Member

Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 16
I never heard about such things. Check how is your ohmmeter set.

Everything is set correctly. Could it be because this is a variable speed induction motor?
Back to top
Gene  
#195 Posted : Monday, February 11, 2013 3:09:36 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What kind of meter did you use?

Gene.
Back to top
freddyrick  
#196 Posted : Tuesday, February 12, 2013 8:14:33 AM(UTC)
freddyrick

Rank: Member

Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 16
Originally Posted by: Gene Go to Quoted Post
What kind of meter did you use?

Gene.

Basic digital ohmmeter.
Back to top
Gene  
#197 Posted : Tuesday, February 12, 2013 5:36:44 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: freddyrick Go to Quoted Post
...I got two different readings on R/W at the new motor when I reversed polarity of the ohmmeter...


What was the difference?

How good is the battery in your meter?

Have you replaced the main control board yet?

Gene.
Back to top
freddyrick  
#198 Posted : Wednesday, February 13, 2013 11:28:33 AM(UTC)
freddyrick

Rank: Member

Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 16
Originally Posted by: Gene Go to Quoted Post
What was the difference?

How good is the battery in your meter?

Have you replaced the main control board yet?

Gene.


I just got a new board to go with the new motor, and will install them together and hope for the best. Thanks.
Back to top
Gene  
#199 Posted : Wednesday, February 13, 2013 6:57:52 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
You are welcome. Both new parts together should fix it.

Gene.
Back to top
freddyrick  
#200 Posted : Tuesday, April 2, 2013 6:50:33 AM(UTC)
freddyrick

Rank: Member

Groups: Registered
Joined: 1/27/2013(UTC)
Posts: 16
Originally Posted by: Gene Go to Quoted Post
You are welcome. Both new parts together should fix it.

Gene.


Hello again. Installed both parts and it worked fine for over a month. Yesterday I found the evaporator coil all frosted up. Defrosted with the blow dryer, seems to be working OK again. Any ideas what might have caused the coil to frost up? Thanks.
Back to top
Users browsing this topic
Guest (2)
22 Pages«<1819202122>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET