Xfe361lvb Oven Wont Heat,no Error Codes Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: XFE361LVB	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

awvufan76		#1 Posted : Wednesday, September 12, 2012 10:10:51 AM(UTC)
Rank: Member Groups: Registered Joined: 9/12/2012(UTC) Posts: 2		My oven is a year and a half old. the stove works bit the oven dont. im gettin no error codes.elements wont heat in bake broil or clean cycles. i have powee to elements when thesw settings are on but no heat.i am getting continuity on my elements...i am puzzled. please help me....thanks..:confused: sorry but the model # is WFE361LVB....thanks
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Simon / APP Team		#2 Posted : Wednesday, September 12, 2012 1:08:43 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Please check the model number and manufacturer, the one you provided doesn't come up. Simon.
User Profile View All Posts by User View Thanks

awvufan76		#3 Posted : Sunday, September 16, 2012 3:34:44 PM(UTC)
Rank: Member Groups: Registered Joined: 9/12/2012(UTC) Posts: 2		Sorry...WFE361LVB....the" w "looked like an "x".
User Profile View All Posts by User View Thanks

Simon / APP Team		#4 Posted : Monday, September 17, 2012 11:31:55 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Still missing one number after B. Are you getting 240VAC to the elements? Please explain how do you measure the voltage. Simon
User Profile View All Posts by User View Thanks

jklawitter		#5 Posted : Wednesday, January 9, 2013 7:34:50 PM(UTC)
Rank: Member Groups: Registered Joined: 1/9/2013(UTC) Posts: 3		I have a wfe381lvs and am having the same problems...no error codes, stove top and clock work fine but no heat to the oven. Sensor has been tested and is good. Please help.
User Profile View All Posts by User View Thanks

Simon / APP Team		#6 Posted : Wednesday, January 9, 2013 9:44:04 PM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. If there is no bake or broil most likely the thermal fuse is blown Part number: 3196548 It's not very clear where is it (the diagram is not the best) but I think you should look under the top, behind the door latch. the video clip take you to the back of the range...you may check it too. Here are the breakdown diagrams and Chassis parts for Whirlpool WFE381LVS1 - AppliancePartsPros.com It's #26. Simon. Good luck. Post the results.
User Profile View All Posts by User View Thanks

jklawitter		#7 Posted : Thursday, January 10, 2013 4:17:43 AM(UTC)
Rank: Member Groups: Registered Joined: 1/9/2013(UTC) Posts: 3		Thanks so much for your quick reply. I recognize that part...it's on the back side of the unit. I already had the back panel off trying to see if there were any wires that looked like they had shorted out and I remember seeing this particular piece on the back. Do you know what the ohms reading should be on the thermal fuse to determine if it's good or bad?
User Profile View All Posts by User View Thanks

Simon / APP Team		#8 Posted : Thursday, January 10, 2013 10:59:11 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		Hi. Take one wire off the fuse when checking. You should read 0ohm.If it's open - replace it. Simon.
User Profile View All Posts by User View Thanks

jklawitter		#9 Posted : Thursday, January 10, 2013 7:35:21 PM(UTC)
Rank: Member Groups: Registered Joined: 1/9/2013(UTC) Posts: 3		I tested the fuse...it works. I have no idea what's wrong with this range....??
User Profile View All Posts by User View Thanks

Simon / APP Team		#10 Posted : Friday, January 11, 2013 11:18:42 AM(UTC)
Rank: Advanced Member Groups: APP Team Joined: 2/12/2012(UTC) Posts: 5,556		HI. If the fuse is good you need a control board/clock Part number: W10271740 For the white panel use W10271739 Simon.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)