5 Pages«<2345> Go to Page...

bosch dishwasher question shu4302uc Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: SHU4302UC/U06	Brand: Bosch	Age: 5 - 10 years
Previous Topic Next Topic

melissourgos		#31 Posted : Tuesday, November 6, 2012 8:42:02 AM(UTC)
Rank: Member Groups: Registered Joined: 9/26/2012(UTC) Posts: 27		Thanks for the documentation, but what i really need to know is how to chk the NTC cause there two sets of wires going to it (2 red and 2 green). can you please tell me how to chk that? Thanks.
User Profile View All Posts by User View Thanks

Gene		#32 Posted : Tuesday, November 6, 2012 9:29:31 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The instructions are attached. Gene. File Attachment(s): Testing Heater and NTC - 2.doc (687kb) downloaded 5 time(s).
User Profile View All Posts by User View Thanks

melissourgos		#33 Posted : Tuesday, November 6, 2012 4:31:17 PM(UTC)
Rank: Member Groups: Registered Joined: 9/26/2012(UTC) Posts: 27		This is what I came up with starting at the lowest ohm setting and moving up if needed. Heater: OL at all settings Flow switch removed from the heater : 000.0 ohms NTC: 57.8 Kohms Hi-limit: never got stable to one setting and ranged between 14 and .4 ohms. I did the NTC and Hi-limit test with the sensor still attached to the heater.
User Profile View All Posts by User View Thanks

Gene		#34 Posted : Wednesday, November 7, 2012 10:06:03 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		How did you check the heater? Did you remove the wires? If you did then the heater is bad. - The heater assembly Part number: 264462 Gene.
User Profile View All Posts by User View Thanks

melissourgos		#35 Posted : Wednesday, November 7, 2012 6:43:20 PM(UTC)
Rank: Member Groups: Registered Joined: 9/26/2012(UTC) Posts: 27		yes the wires were removed. does the bottom of the dishwasher need to be removed to replace the heater?
User Profile View All Posts by User View Thanks

Gene		#36 Posted : Friday, November 9, 2012 4:11:29 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		I'm afraid you have not read all files attached to the posts earlier. Open the file from the post at 11/01 please. Gene.
User Profile View All Posts by User View Thanks

melissourgos		#37 Posted : Wednesday, November 28, 2012 12:46:09 PM(UTC)
Rank: Member Groups: Registered Joined: 9/26/2012(UTC) Posts: 27		I replaced the heater and the machine it goes thru the cycle without any problems. But it does not desolve all the detergent in the dispenser. This is odd cause it has never done this before. If you have any suggestions please let me know. Thank you very much for all your help.
User Profile View All Posts by User View Thanks

Gene		#38 Posted : Wednesday, November 28, 2012 2:44:39 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		What kind of detergent did you use? Open the door during the wash cycle to check how much water is inside and post the result. Gene.
User Profile View All Posts by User View Thanks

melissourgos		#39 Posted : Wednesday, November 28, 2012 3:42:26 PM(UTC)
Rank: Member Groups: Registered Joined: 9/26/2012(UTC) Posts: 27		If that model has 3 washing arms then I am missing one the one on the roof of the machine. That would explain why it does not clear the dispenser cause it does not build up enough pressure. Pls let me know.
User Profile View All Posts by User View Thanks

Gene		#40 Posted : Wednesday, November 28, 2012 4:33:22 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: melissourgos ...If that model has 3 washing arms... Did you see any signs of such third arm? I did not see it on the diagrams. Gene.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (9)

5 Pages«<2345> Go to Page...