Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Whirlpool Duet dispenser Motor/arm problem (f30)
Options
Go to last post Go to first unread
Model: WHIRLPOOL DUET SPORT Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
Grandnational007  
#1 Posted : Tuesday, August 14, 2012 6:37:37 AM(UTC)
Grandnational007

Rank: Member

Groups: Registered
Joined: 8/14/2012(UTC)
Posts: 5
This thing is driving me crazy, was able to get it down to the arm bending up, thus causing the f30 code trip indicating a bad dispenser motor

Here's a vid I took:Whirlpool duet sport dispenser motor arm - YouTube

I think it's just the arm has fatigued after hundreds of cycles as you can see it bend up when the cam tries to push it over. When I push it down, it continues functioning flawlessly. Anyone know if just replacing the two arms and the cam will work, or should I replace the dispenser motor too?

I'm just worried the damage to the motor may have been done if the plastic gears have stripped
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, August 14, 2012 3:42:55 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is the complete model number of the washer?

Gene.
Back to top
Grandnational007  
#3 Posted : Tuesday, August 14, 2012 4:53:02 PM(UTC)
Grandnational007

Rank: Member

Groups: Registered
Joined: 8/14/2012(UTC)
Posts: 5
It's wfw8300SW02

Duet Sport Washer
Back to top
Grandnational007  
#4 Posted : Tuesday, August 14, 2012 4:58:09 PM(UTC)
Grandnational007

Rank: Member

Groups: Registered
Joined: 8/14/2012(UTC)
Posts: 5
I'm thinking I'm going to order "lever" pn 8540394 as it shows in sears parts direct....I need to do some more research to find the exact part here. I've ordered from APP before and wish to do it again once I find the right pn
Back to top
Gene  
#5 Posted : Wednesday, August 15, 2012 3:01:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The lever with the Part number: 8540394
Part number: 8540394


you mentioned in your post is shown as #7 at the diagram. The APP price for this part is less than Sears. You also might need the parts #6 & #11.

Gene.
Back to top
Grandnational007  
#6 Posted : Wednesday, August 15, 2012 5:01:11 PM(UTC)
Grandnational007

Rank: Member

Groups: Registered
Joined: 8/14/2012(UTC)
Posts: 5
Hi Gene,

I ordered the arm today from you folks; I'll let everyone know how it works once it arrives as this appears to be a common problem with these washers. Hopefully it does the trick.
Back to top
Grandnational007  
#7 Posted : Saturday, August 18, 2012 8:37:34 AM(UTC)
Grandnational007

Rank: Member

Groups: Registered
Joined: 8/14/2012(UTC)
Posts: 5
Hi Folks,

I ordered the lever, and it arrived the next day (holy smokes!), but to no avail, it did not correct the problem. I'm going to try pn 8540395 next to see if that will work
Back to top
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET