Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Swamp ape  
#1 Posted : Wednesday, March 7, 2012 7:44:20 AM(UTC)
Swamp ape

Rank: Member

Groups: Registered
Joined: 3/5/2012(UTC)
Posts: 3

I got a F06 error code on my washer the other night. In reading about this code I understand that it could be the MCU, CCU, door lock switch, or the harnesses. The machine will drain, add water, and spin for a short period of time (2 min) before the timer begins to flash the time left, and eventually it begins to beep and flash F06. I have check the bottom harness for any loose or broken wires, cleaned out the pump, and have an MCU on order. If this doesn't fix the problem, where do I go next?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Joe / APP Team  
#2 Posted : Wednesday, March 7, 2012 1:46:56 PM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Swamp ape Go to Quoted Post
I got a F06 error code on my washer the other night. In reading about this code I understand that it could be the MCU, CCU, door lock switch, or the harnesses. The machine will drain, add water, and spin for a short period of time (2 min) before the timer begins to flash the time left, and eventually it begins to beep and flash F06. I have check the bottom harness for any loose or broken wires, cleaned out the pump, and have an MCU on order. If this doesn't fix the problem, where do I go next?


Swamp ape,
You're most likely on target with the MCU Part number: AP3861856
Part number: AP3861856

As long as you're sure there are no loose wires or connections at either control board.
If the MCU replacement doesn't solve the issue, then the CCU
Part number: AP3859567
Part number: AP3859567
is the next step.

Thanks,
:) :) :)
Gary/APP Team  
#3 Posted : Wednesday, March 7, 2012 1:48:19 PM(UTC)
mattt

Rank: Member

Groups:
Joined: 12/1/2008(UTC)
Posts: 0

Originally Posted by: Swamp ape Go to Quoted Post
I got a F06 error code on my washer the other night. In reading about this code I understand that it could be the MCU, CCU, door lock switch, or the harnesses. The machine will drain, add water, and spin for a short period of time (2 min) before the timer begins to flash the time left, and eventually it begins to beep and flash F06. I have check the bottom harness for any loose or broken wires, cleaned out the pump, and have an MCU on order. If this doesn't fix the problem, where do I go next?


Hello . I have sent you the failure codes for your duet, also there should be a tech sheet inside of the unit if you will remove the toe panel on the front of the washer, the tech sheet is usually on the right hand side wall of the unit in a plastic bag, this has alot of good information for diagnosing this problem step by step, it will show you how to run the diagnostics on the unit,most likely it is the mcu board by the information you have given, I hope this helps thank you and good luck !
Swamp ape  
#4 Posted : Thursday, March 8, 2012 6:08:57 AM(UTC)
Swamp ape

Rank: Member

Groups: Registered
Joined: 3/5/2012(UTC)
Posts: 3

Thanks guys. I hope to get the part today and will let you know what I find...
Joe / APP Team  
#5 Posted : Thursday, March 8, 2012 7:20:21 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Swamp ape Go to Quoted Post
Thanks guys. I hope to get the part today and will let you know what I find...



Great !!!!

Good Deal, keep us informed.

Thanks,
:) :) :)
Swamp ape  
#6 Posted : Thursday, March 15, 2012 4:41:23 AM(UTC)
Swamp ape

Rank: Member

Groups: Registered
Joined: 3/5/2012(UTC)
Posts: 3

I R & R'd the MCU and the error went away. I've put about 7 loads through it. Everything seems good. Thanks for the help.
Joe / APP Team  
#7 Posted : Thursday, March 15, 2012 5:17:22 AM(UTC)
Joe / APP Team

Rank: Advanced Member

Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222

Was thanked: 1 time(s) in 1 post(s)
Originally Posted by: Swamp ape Go to Quoted Post
I R & R'd the MCU and the error went away. I've put about 7 loads through it. Everything seems good. Thanks for the help.


Swamp ape,

Great, glad to hear you're up and running.
Glad, we were able to help you out. Thanks for the update.

Thanks Again and You're welcome,
:) :) :)
Users browsing this topic
Guest (3)
Similar Topics
Whirlpool Duet F06 error -- seeking input (Washer Repair)
by TexPat60 2/21/2022 8:25:46 PM(UTC)
Whirlpool Duet F06 error, changing MCU didn't help (Washer Repair)
by Racingguy04 8/29/2013 11:18:08 PM(UTC)
Duet F06 error code after 25-40 minutes in cycle (Washer Repair)
by ekinskofer 4/10/2013 9:32:22 AM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.