Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
2 Pages12>
kenmore dryer wont start
Options
Go to last post Go to first unread
Model: 11066962500 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
fsw44  
#1 Posted : Monday, March 12, 2012 11:01:27 AM(UTC)
fsw44

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 6
my dryer is acting up and it does not want to start every once in a while so i took it apart and checked out the start switch and the thermal fuse and the door switch they all check out fine whatelse could be causing this?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
JW Webster  
#2 Posted : Monday, March 12, 2012 11:17:09 AM(UTC)
JW Webster

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 31
Broken belt switch could be going out. It is a micro switch. Might be the motor is going bad.
Back to top
Simon / APP Team  
#3 Posted : Monday, March 12, 2012 11:31:47 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.
Unfortunately it's very hard to proper diagnose the "every once in the while problem". To run the test the dryer has to be "down". The most common problem could be the motor or the timer. Also the door switch may have intermittent problem. Guessing is expensive.
Next time try to push and release the door switch several
times, see if it helps.
The defective belt switch definitely will cause the problem.
Is there anything you do that makes the dryer start?
Please post results.
Back to top
fsw44  
#4 Posted : Monday, March 12, 2012 11:44:48 AM(UTC)
fsw44

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 6
i dont think its the motor cause when it runs no smell and it dries everything and runs fine when it starts and there is 3 leads coming to the door switch i have continuity on 2 of them and none on 1 which 1 do i check?
Back to top
fsw44  
#5 Posted : Monday, March 12, 2012 11:52:26 AM(UTC)
fsw44

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 6
Originally Posted by: fsw44 Go to Quoted Post
i dont think its the motor cause when it runs no smell and it dries everything and runs fine when it starts and there is 3 leads coming to the door switch i have continuity on 2 of them and none on 1 which 1 do i check?

also wherE will i find the motor switch ?
Back to top
Simon / APP Team  
#6 Posted : Monday, March 12, 2012 1:45:04 PM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hi.
The belt switch located at the rear motor mounting bracket.
To test the door switch - locate the single wire on one side - common wire (marked C) and with door closed you should have continuity between C and NO. Open the door - continuity between C and NC.

The belt switch Part number: 279782
Part number: 279782


The door switch Part number: AP3132865
Part number: AP3132865


Post the results.
Back to top
JW Webster  
#7 Posted : Monday, March 12, 2012 2:26:59 PM(UTC)
JW Webster

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 31
Near the motor and idler:
Small white switch with a yellow wire going to it:

http://1.bp.blogspot.com/-va6qJ...tezBHBU1Ts/s1600/030.jpg
Back to top
JW Webster  
#8 Posted : Monday, March 12, 2012 2:28:16 PM(UTC)
JW Webster

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 31
Hallerween day I fixed one of these type dryers and made a few photos:

ApplianceJunk.com Blogspot: Kenmore 4-wheel drive dryer de-mystified!:p
Back to top
fsw44  
#9 Posted : Tuesday, March 13, 2012 10:47:40 AM(UTC)
fsw44

Rank: Member

Groups: Registered
Joined: 3/12/2012(UTC)
Posts: 6
ok so i just checked the continuity on the motor switch and it is all 000 so then i checked the door switch and it is all 000's when closed but when open its 001 is the door switch bad then. or is it the motor?
Back to top
Simon / APP Team  
#10 Posted : Tuesday, March 13, 2012 10:56:21 AM(UTC)
Simon / APP Team

Rank: Advanced Member

Groups: APP Team
Joined: 2/12/2012(UTC)
Posts: 5,556
Hello.

Please describe how did you do the tests.
Back to top
Users browsing this topic
Guest (6)
Similar Topics
kenmore dryer wont start (Dryer Repair)
by coindog1 7/26/2015 12:33:16 PM(UTC)
kenmore dryer wont start (Dryer Repair)
by 22Hunt 3/18/2013 6:51:01 AM(UTC)
My kenmore dryer wont start (Dryer Repair)
by Mike Swanson 3/11/2010 9:27:48 AM(UTC)
kenmore dryer wont start (Dryer Repair)
by MOUSENUP 9/5/2009 4:23:59 PM(UTC)
kenmore dryer wont start (Dryer Repair)
by sargento52 8/30/2009 1:17:44 PM(UTC)
Kenmore Dryer wont start (Dryer Repair)
by rrhoward78 2/1/2009 6:50:52 AM(UTC)
2 Pages12>
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET