Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: jojonychome  furious right now took the whole machine apart and replaced the rotor and the machine is still bouncing from side to side and up and down i am still getting the f1 code on the machine....i thought this was on recall for that problem JoJo, If you've done all the reccomended checks , repairs and lubrication, there's not a lot left to check. Make sure the washer is level (in both directions)and the feet are locked and washer is as close the the floor as possible. Make sure there is no vibration or movement in the floor or flooring. But I thought you had done those checks, first. I don't remember a "recall" for F1 or F51 codes, or vibration issue, There were quite a few technical updates, and we have already coverred all of those. You may want to contact the manufacturer and varify the recal, or see if they can assist you. :) :) :)
|
|
|
|
|
|
wildride
(Washer Repair)
by jojonychome
4/21/2011 9:54:32 AM(UTC)
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
