Rank: Member
Groups: Registered
Joined: 11/19/2007(UTC)
Posts: 2
|
I'm not sure how to access the heating element, from the top, front, or back? I took all the screws out of the back but panel does not seem to want to come off.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/2/2007(UTC)
Posts: 129
|
Use a putty knife on the clips on the front lower paner. Look in between panels and you will see the clips. Make sure you unplug dryer. you will see the element you have to take the screws out of the element housing. They are on the left side. then just pull element out.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 11/19/2007(UTC)
Posts: 2
|
Sorry, what I really wanted to know was how to get to it from the outter housing. Do you take off the back panel because it doesn't seem like it comes off?
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 10/2/2007(UTC)
Posts: 129
|
tAKE OFF THE FRONT LOWER PANEL. NO YOU CAN NOT GET AT IT FROM THE BACK.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
