Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No water to icemaker, water dispenser works
Options
Go to last post Go to first unread
Model: PSS27SGNABS Brand: GE Age: 5 - 10 years
Previous Topic Next Topic
BobK898  
#1 Posted : Wednesday, January 7, 2009 10:08:20 AM(UTC)
BobK898

Rank: Member

Groups: Registered
Joined: 11/29/2008(UTC)
Posts: 6
Opened the freezer to find frozen water over the icemaker and the water inlet area. Put the hair dryer on it and melted it away. Turned the icemaker back on and ran through 2 cycles and stopped. Green light not flashing. Checked the trays and no water was in the trays. The water inlet hose appears patent.

The water dispenser does work fine though.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
BobK898  
#2 Posted : Thursday, January 8, 2009 5:45:43 AM(UTC)
BobK898

Rank: Member

Groups: Registered
Joined: 11/29/2008(UTC)
Posts: 6
A little help here. Gene?
Back to top
Gene  
#3 Posted : Thursday, January 8, 2009 11:25:52 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The first failure suspect is the water inlet valve (#800 on the break down diagram). You can check the solenoid resistance (about 180 Ohms) but even if the reading is good it could be stuck in close position. There is a small chance for the control board to be bad too. I would recommend to replace the water inlet valve first.

- The part number for the water valve is AP3192626

Here are the break down diagrams for the GE refrigerator Model PSS27SGNABS

Gene.
Back to top
BobK898  
#4 Posted : Wednesday, January 14, 2009 8:21:54 AM(UTC)
BobK898

Rank: Member

Groups: Registered
Joined: 11/29/2008(UTC)
Posts: 6
Gene, thank you for the reply. I replaced the water inlet valve. The ice cube maker "comb" spun around twice and green light flashed on and off. I turned the ice maker off and turned it back on and it started to spin around again. No water came in through the fill hose into the icemaker.
Back to top
Gene  
#5 Posted : Wednesday, January 14, 2009 2:09:52 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
What is going with the green LED on the ice maker? If it's blinking then the ice maker is bad.

Gene.
Back to top
BobK898  
#6 Posted : Wednesday, January 14, 2009 3:19:38 PM(UTC)
BobK898

Rank: Member

Groups: Registered
Joined: 11/29/2008(UTC)
Posts: 6
Thank you Gene. It flashed on and off after the "comb" spun around twice. No water had come out of the inlet hose though. I turned off the icemaker and turned it back on. Now the "comb" is not even moving, the light is not blinking.
Back to top
Gene  
#7 Posted : Friday, January 16, 2009 12:49:11 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The ice maker behavior is very suspicious.

- The part number for the new (redesigned) ice maker is AP4345120

Gene.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET