Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
flame sensor
Options
Go to last post Go to first unread
Brand: Estate Age: 5 - 10 years
Previous Topic Next Topic
sarrah76  
#1 Posted : Friday, January 9, 2009 9:37:57 AM(UTC)
sarrah76

Rank: Member

Groups: Registered
Joined: 1/5/2009(UTC)
Posts: 5
I am replacing the flame sensor on my estate gas dryer. The flame sensor has two prongs one has red dot on it. There are two wires one blue one white I was wondering which wire went where? Does the blue on go to the red dot or does the white one? My model number is TGDS740JQ1 Thank you
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
kayakcrzy  
#2 Posted : Saturday, January 10, 2009 4:37:19 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429
When the senssor is on the flame tube, the blue goes on the bottom terminal. Tom
Back to top
Users browsing this topic
Guest (2)
Similar Topics
gas hot water heater flame sensor (General Talk)
by normpete 1/21/2022 9:10:29 AM(UTC)
Gas dryer flame sensor not tripping (Dryer Repair)
by Guest 6/1/2021 7:32:22 PM(UTC)
Igniter, flame sensor, soleniods, thermal sensor all OK - but no heat (Dryer Repair)
by silentrunningpc 9/1/2016 4:34:36 PM(UTC)
No power to flame sensor, gas valves, or ignitor (Dryer Repair)
by ms0674 8/9/2014 2:37:45 PM(UTC)
Dryer Flame Sensor (Dryer Repair)
by TomHam 9/3/2013 1:00:20 PM(UTC)
Replaced gas coil, ignitor, flame sensor.. (Dryer Repair)
by dspcr 8/16/2013 4:12:54 PM(UTC)
flame stays lit for a few (20) seconds then goes out. could it be the flame sensor? h (Dryer Repair)
by grubxx96 11/11/2011 1:01:45 PM(UTC)
Kenmore replaced coils,ignitor,and flame sensor still no heat. (Dryer Repair)
by cfreeman 12/30/2010 10:31:48 AM(UTC)
Thermal fuse and Flame sensor wiring (Dryer Repair)
by cwizzards 5/7/2010 10:22:30 AM(UTC)
Dryer Flame Sensor (Dryer Repair)
by Dangilligan 9/9/2009 5:34:55 PM(UTC)
relpaced coils and flame sensor and no heat (Dryer Repair)
by mjl 7/3/2009 2:20:19 PM(UTC)
Wiring Flame Sensor (Dryer Repair)
by TomGJohnson 6/9/2009 2:29:13 PM(UTC)
New flame sensor failure? (Dryer Repair)
by spiderberg 4/1/2009 6:54:40 AM(UTC)
Flame sensor (Dryer Repair)
by redrwut 2/21/2009 9:18:14 AM(UTC)
Which wire to which terminal on the flame sensor? (Dryer Repair)
by supertramp 1/13/2009 2:22:16 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET