Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
brian.frasco@gmail.com  
#1 Posted : Friday, December 26, 2008 1:28:44 PM(UTC)
brian.frasco@gmail.com

Rank: Member

Groups: Registered
Joined: 12/26/2008(UTC)
Posts: 2

The gas flame does not stay on for more than 20 seconds at any given cycle. As a result, the air temperature in the exhaust duct (near filter screen) does not exceed 110 degrees and the the dial does not proceed in the cycle. Drying of clothes takes forever - if at all.

Replaced both the high-temp thermostat (Ap4036956) and MuliTemp Thermostat (307250). Also, ensured that the air duct/screen is completely clear.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
kayakcrzy  
#2 Posted : Saturday, December 27, 2008 6:13:15 AM(UTC)
kayakcrzy

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/1/2008(UTC)
Posts: 2,429

Replace the coils on the gas valve.[URL="http://www.applianceeducator.com/partshtm"][/URL]
brian.frasco@gmail.com  
#3 Posted : Saturday, December 27, 2008 10:48:26 AM(UTC)
brian.frasco@gmail.com

Rank: Member

Groups: Registered
Joined: 12/26/2008(UTC)
Posts: 2

Thanks,

However, I did one more experiment where I disconnected the dryer exhaust from the external exhaust duct. The dryer worked perfectly. The flapper was blocked and lint clogged the exhaust duct. I learn something new all the time.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.