help replacing the turntable coupler - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

help replacing the turntable coupler Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MMV4205 1150 WATTS MICROWAVE OVEN	Brand: Maytag	Age: 1 - 5 years
Previous Topic Next Topic

undertaker69		#1 Posted : Thursday, May 26, 2011 7:00:39 AM(UTC)
Rank: Member Groups: Registered Joined: 5/26/2011(UTC) Posts: 2		Hey all, I need step by step instructions to replace the turntable coupler on my microwave oven. I have tried to find out but I think my fellow repaiers on this site would be better help. Thanks foe any and all help.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Joe / APP Team		#2 Posted : Thursday, May 26, 2011 3:15:00 PM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 7/14/2010(UTC) Posts: 5,222 Was thanked: 1 time(s) in 1 post(s)		Originally Posted by: undertaker69 Hey all, I need step by step instructions to replace the turntable coupler on my microwave oven. I have tried to find out but I think my fellow repaiers on this site would be better help. Thanks foe any and all help. Undertaker, Is this the coupler, Part number: AP4246244 It's a very tight fit, but it pulls up and off the motor shaft, be careful, if you decide to attempt to pry it off, don't chip or scratch the paint off the cavity or you'll have to touch it up , bare metal arcs and sparks in a microwave. Good Luck, :) :) :)


User Profile View All Posts by User View Thanks

undertaker69		#3 Posted : Thursday, May 26, 2011 5:07:55 PM(UTC)
Rank: Member Groups: Registered Joined: 5/26/2011(UTC) Posts: 2		Joe, that is the part it lifted straight up because half of it was gone. Are you saying all I have to do is push it back in.??? Surely it is not that simple.


User Profile View All Posts by User View Thanks

Joe / APP Team		#4 Posted : Friday, May 27, 2011 5:28:55 AM(UTC)
Rank: Advanced Member Groups: Moderators Joined: 7/14/2010(UTC) Posts: 5,222 Was thanked: 1 time(s) in 1 post(s)		Originally Posted by: undertaker69 Joe, that is the part it lifted straight up because half of it was gone. Are you saying all I have to do is push it back in.??? Surely it is not that simple. Undertaker, Yes , you just line it up on the motor shaft and press down until it stops. Good Luck, :cool: :cool: :cool:


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close