Oven keeps heating - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Oven keeps heating Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: PART#8522379	Brand: Roper	Age: 1 - 5 years
Previous Topic Next Topic

rowilson		#1 Posted : Saturday, October 13, 2007 9:46:57 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2007(UTC) Posts: 3		Roper range/oven given to us, seems to be working fine, then issues 2 error codes out of the blue - F3 and E2 (i think), realized the oven is heating up even though we did not turn it on. Any thoughts out there? Thanks Rose


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Gene		#2 Posted : Saturday, October 13, 2007 10:41:45 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi rowilson In order to provide you with the most accurate information I need the complete model number of the range. You can fins it on the oven door frame or on the frame behind the bottom drawer. The model number you provided is incorrect. Gene.


User Profile View All Posts by User View Thanks

rowilson		#3 Posted : Sunday, October 14, 2007 12:29:32 PM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2007(UTC) Posts: 3		Thanks Gene model #FES330KQ Serial #RL3022463 Thanks Rose


User Profile View All Posts by User View Thanks

Gene		#4 Posted : Sunday, October 14, 2007 3:00:09 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi Rose The problem with your oven caused by the shorted "Bake" relay on the Electronic Range Control (ERC). To fix it the ERC has to be replaced. Also check the resistance on the oven temperature sensor. At the room temperature it suppose to be about 1100 Ohms. If the reading is different the oven temperature sensor has to be replaced too. - Here are the break down diagrams for the Roper range Model FES330KQ0 - The part number for the new black ERC AP2989925 - The part number for the new white ERC AP3085712 - The part number for the new oven temperature sensor AP3081560 Good luck. Gene.


User Profile View All Posts by User View Thanks

rowilson		#5 Posted : Tuesday, October 16, 2007 11:43:40 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2007(UTC) Posts: 3		Gene Thanks for all your help. in the meantime, is there anyway to just disconnect the oven part so that the stovetop can be used? Thanks Rose


User Profile View All Posts by User View Thanks

Gene		#6 Posted : Tuesday, October 16, 2007 5:05:02 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Hi Rose Yes, you can do it. Remove the power from the range, open the control panel and disconnect wires from the Bake and Broil terminals on the control board. Remember which wire were goes. Insulate the wires. Assemble the control panel back and restore the power. Good luck. Gene.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close