Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
stevieb009  
#1 Posted : Monday, November 3, 2008 6:44:24 PM(UTC)
stevieb009

Rank: Member

Groups: Registered
Joined: 11/3/2008(UTC)
Posts: 2

Dear Sirs,

I have just broken the internal glass panel on the above GE oven. On the door itself it quotes a replacement part of 326B1016P001 but I could not find this part on your web-site. The nearest component I could find was AP2033716 which was for the Model Number JTP44GV2BB (no 'O' in this model number).

I am not sure which part needs to be replaced, but suffice to say it is the internal glass pane which has cracked.

Can you please advise on which component needs to be replaced and whether this can be done as a DIY job or whether I need to get a professional in to do the job.

I attach a couple of photos of the crack itself in the door along with the door component part number as shown inside the door itself

Many thanks

Steve Blackman
File Attachment(s):
Broken Oven Door 2.doc (474kb) downloaded 4 time(s).
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
libertyappl  
#2 Posted : Monday, November 3, 2008 7:11:38 PM(UTC)
libertyappl

Rank: Advanced Member

Groups: Senior Expert
Joined: 8/13/2008(UTC)
Posts: 3,097

GE drops the 0 in the model number so I think the AP number you posted is the correct part.

Nat
stevieb009  
#3 Posted : Tuesday, November 4, 2008 2:41:28 PM(UTC)
stevieb009

Rank: Member

Groups: Registered
Joined: 11/3/2008(UTC)
Posts: 2

Is the replacement of the glass for the oven a DIY job or should this be done by a professional??
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.