Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Fire Hazard?
Options
Go to last post Go to first unread
Model: 11067732794 Brand: Kenmore Age: 5 - 10 years
Previous Topic Next Topic
CJRLMPLS  
#1 Posted : Monday, October 8, 2007 11:31:46 AM(UTC)
CJRLMPLS

Rank: Member

Groups: Registered
Joined: 10/8/2007(UTC)
Posts: 2
This drier stopped working for the second time - I had replaced the non-resettable thermal fuse about 4 years ago and all had been well.

Two days ago the same thing happened - except this time. after it stopped, my wife checked a couple of things then walked away from it. About 30 mins later, she smelt 'hot metal', checked it and discovered it was extremely hot. To cut a long story short, I unplugged it, went and got a new thermal link, replaced it then plugged it back in. The heater IMMEDIATELY came on - the door was open and the motor was not running. I pressed the start button - the motor started and the drier appeared to work.

Apparently the interlock that prevents the heater from being powered when the motor/fan is not running is dead.

Where is that interlock? Is it part of the motor switch? Is it an airflow detector vane in the fan path? The diagram I have is not specific. Wahat do I need to buy?

Anyone got any ideas?

Thanks!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
richappy  
#2 Posted : Tuesday, October 9, 2007 1:08:05 PM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
Your motor switch shorted and they do not sell the switch, you have to buy the whole motor. That part # is AP3094245
Back to top
CJRLMPLS  
#3 Posted : Tuesday, October 9, 2007 5:12:35 PM(UTC)
CJRLMPLS

Rank: Member

Groups: Registered
Joined: 10/8/2007(UTC)
Posts: 2
Thanks! I'd kind of figured that out - went to Sears this lunchtime - found the motor with the pluggable switch securely attached. Why? The motor still works - ah well!

I'm now deciding whether I want to invest the $110 or so in the motor plus the aggravation of installing it - or just give up and get a gas dryer!

Thanks for the help, tho'
Back to top
richappy  
#4 Posted : Wednesday, October 10, 2007 12:47:58 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
I share your disgust; I pull the switches off these when I junk them, have a few lying around; would never sell one, but would use one in a repair!
Back to top
Users browsing this topic
Guest (4)
Similar Topics
Main Control Board - Fire Hazard? (Dryer Repair)
by Highlander2017 10/6/2017 6:58:31 AM(UTC)
Normal for heating element or fire hazard? (Dryer Repair)
by NWHomebody 12/6/2010 11:51:35 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET