GE Dual Wave II - Microwave "popped" Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: JKP68G0K3	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

gpdreier		#1 Posted : Monday, October 6, 2008 5:04:35 PM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 4		While heating a cup of water in the microwave. An electrical "pop" was heard coming from the microwave then the lights on the control panel went off. The circuit breaker did not flip off. The microwave no longer works. What happened? Is it something I can repair?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Gene		#2 Posted : Tuesday, October 7, 2008 3:11:53 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Most likely the problem is a shorted high voltage capacitor which caused the fuse to blow out. You can do it yourself if you know how to use a simple multimeter. You have to turn off the power to the unit and discharge the capacitor before do anything else. Gene.
User Profile View All Posts by User View Thanks

gpdreier		#3 Posted : Tuesday, October 7, 2008 4:04:46 PM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 4		I appreciate your reply. The information is most useful. It is sad that I don't know what a high voltage capacitor looks like, where it is located in the microwave, or how to discharge a capacitor. Any additional details and safety precautions are appreciated.
User Profile View All Posts by User View Thanks

Gene		#4 Posted : Wednesday, October 8, 2008 9:16:05 AM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		It is very dangerous to work with the microwave because of high voltage (about 4000 Volts) inside the control compartment . I would recommend to call a qualified tech to do it for you. Gene.
User Profile View All Posts by User View Thanks

gpdreier		#5 Posted : Wednesday, October 8, 2008 8:26:06 PM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 4		I appreciate the warning. This info pleases my wife for obvious reasons. She is making a case to buy a new unit.
User Profile View All Posts by User View Thanks

gpdreier		#6 Posted : Wednesday, October 8, 2008 8:27:33 PM(UTC)
Rank: Member Groups: Registered Joined: 10/6/2008(UTC) Posts: 4		I appreciate the links. The info clearly notes the precautions.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (4)