9 Pages«<6789> Go to Page...

Gas dryer running but no heat Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: LGR7648KQ1	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Gene		#71 Posted : Tuesday, February 22, 2011 1:10:35 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Originally Posted by: diamondjim007 My dryer is acting the same way. It fires, but doesn't refire. I've checked the vent and its open and blowing freely. I'm not sure what I should check next. Please help If it does not reignite then the problem most likely is a bad gas valve coils. - The coil kit Part number: AP3094251 Gene.
User Profile View All Posts by User View Thanks

oasis		#72 Posted : Tuesday, February 22, 2011 3:23:04 PM(UTC)
Rank: Member Groups: Registered Joined: 2/14/2011(UTC) Posts: 10		Thank you! I will order those tonight. The lint screen looks fine, because I have clean it out on every load. How about the thermal fuse? Should I replace that while I am at it?
User Profile View All Posts by User View Thanks

Gene		#73 Posted : Tuesday, February 22, 2011 5:08:20 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		The thermal fuse has nothing to do with this problem. If this fuse is open then the igniter will never go on. Gene.
User Profile View All Posts by User View Thanks

oasis		#74 Posted : Friday, March 4, 2011 8:04:54 PM(UTC)
Rank: Member Groups: Registered Joined: 2/14/2011(UTC) Posts: 10		Just an update! It was a bad Gas Valve Coil. After couple cycle of test, everything is back to normal. Thanks Gene for your help!!!!!
User Profile View All Posts by User View Thanks

jetboatjeff		#75 Posted : Sunday, March 6, 2011 5:55:20 PM(UTC)
Rank: Member Groups: Registered Joined: 3/6/2011(UTC) Posts: 3		Gene, I read your reply back on the first post, you said if you replace the thermal fuse you also need to replace the cycling termostat. my thermal fuse has no continuity, the thermostat has continuity between the two big post but nothing between the small ones, is it also bad? Thanks, Jeff
User Profile View All Posts by User View Thanks

Gene		#76 Posted : Monday, March 7, 2011 5:42:41 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		Jeff, The point is that the cycling thermostat can be bad even if it pass continuity test because it can read wrong temperature, causing the dryer to overheat. Gene.
User Profile View All Posts by User View Thanks

jetboatjeff		#77 Posted : Monday, March 7, 2011 5:46:50 PM(UTC)
Rank: Member Groups: Registered Joined: 3/6/2011(UTC) Posts: 3		Thanks, I ordered both pieces.
User Profile View All Posts by User View Thanks

Gene		#78 Posted : Tuesday, March 8, 2011 7:57:50 PM(UTC)
Rank: Advanced Member Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455 Was thanked: 4 time(s) in 4 post(s)		You are welcome. Keep us posted. Gene.
User Profile View All Posts by User View Thanks

jetboatjeff		#79 Posted : Wednesday, March 9, 2011 6:46:51 PM(UTC)
Rank: Member Groups: Registered Joined: 3/6/2011(UTC) Posts: 3		Replaced the fuse and temp sensor, works just like new. Thanks! BTW as long as I had the back off I pulled the lint screen housing / fan housing there was a ton of dirt and dog hair in the bottom around the fan. I was not going to because the vent had strong output so ther was no reason to suspect any blockage, but I'm gald I did now.
User Profile View All Posts by User View Thanks

Scooterboy		#80 Posted : Wednesday, August 17, 2011 5:25:04 PM(UTC)
Rank: Member Groups: Registered Joined: 8/17/2011(UTC) Posts: 1		My turn... My Maytag dryer is not drying. The Gas Valve Relay (on the microprocessor board) does not energize. I get a diagnostic code of "02" which is "Thermistor Open Sensed". With the wires diconnected what ohm reading should I get across the thermister? Model #MDG5500AWW Serial # 42774934AL Thanks in advance Scooots...
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (5)

Similar Topics

Gas Dryer running but no heat (Dryer Repair) by cpenn42 8/26/2011 4:50:25 PM(UTC)

9 Pages«<6789> Go to Page...