Rank: Member
Groups: Registered
Joined: 10/6/2008(UTC)
Posts: 6
|
Our washer works fine but during spin cycle, it's really loud - so loud we can hear it from upstairs. No grinding, no oil on inside, just loud. I've read where it can be the clutch assembly. Could it be the bearing? Thanks
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: raf215  Our washer works fine but during spin cycle, it's really loud - so loud we can hear it from upstairs. No grinding, no oil on inside, just loud. I've read where it can be the clutch assembly. Could it be the bearing? Thanks RAF, Have you noticed any leaks from the machine, or water on the floor ? Your unit is a "Direct Drive" unit and has no clutch. You are most likely correct in assuming it may be a bad bearing. But that can be proceeded by a water leak,(not always, but usually). It would require a complete outer tub assembly, Once you've removed the spin basket and checked for possible articles between the tubs, and loose or damaged motor shaft seal. Part number: AP4316595
Good Luck, :cool: :cool: :cool:
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/21/2011(UTC)
Posts: 4
|
Wow what a great site. I have a Kenmore Oasis 110.27032600 from 2007. The washer makes a loud humming noise during spin. Took it apart for bad bearing. The bearings have leaked grease.
What is the part number that includes the shaft and bearings? I'd like to buy just the basket but's its unclear whether that includes the shaft.
Thanks for any help.
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: porktyme Wow what a great site. I have a Kenmore Oasis 110.27032600 from 2007. The washer makes a loud humming noise during spin. Took it apart for bad bearing. The bearings have leaked grease.
What is the part number that includes the shaft and bearings? I'd like to buy just the basket but's its unclear whether that includes the shaft.
Thanks for any help. Porktyme, I take for granted, Your washer does wash, and you've found that your washer doesn't spin, and the motor hums because the bearing shaft is dragging or seized up due to the leak. You're on track, though. Should you order the outer tub assembly, Part number: AP4316595
You'll recieve all the parts you'll need( drive shaft, bearings, and seal) to take care of the leak and grease. I only hope theres no damage to the motor stator and sensor assembly. Good Luck, :) :) :)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/6/2008(UTC)
Posts: 6
|
Update to my original post.
I called Sears and for the cost of the repair tech, both the inner and outer tubs were replaced as I found out that those 2 pieces have a 10 year warranty. Took tech about 45 minutes to repair and washer is good as new! :)
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: raf215 Update to my original post.
I called Sears and for the cost of the repair tech, both the inner and outer tubs were replaced as I found out that those 2 pieces have a 10 year warranty. Took tech about 45 minutes to repair and washer is good as new! :) RAF, Thanks for the update. We're glad things are up and running, and you're happy. Good Luck, :) :) :)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/21/2011(UTC)
Posts: 4
|
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: porktyme Porktyme, I do show that part available in one of our warehouses(several to be more exact). Our parts order screens are not "same time" and we occasionally have mis information. I'm sure if you order it, you'll recieve it, in a timely manner. :) :) :)
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/21/2011(UTC)
Posts: 4
|
Order placed. Thanks for all your help!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: porktyme Order placed. Thanks for all your help! My pleasure, Drop us a line if you need more assistance, or when you're through with the repair. We're here to help, Good Luck, :cool: :cool: :cool:
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
