Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bdpead  
#1 Posted : Thursday, October 28, 2010 9:58:54 PM(UTC)
bdpead

Rank: Member

Groups: Registered
Joined: 10/28/2010(UTC)
Posts: 1

3 months ago our Kitchen Aid KEMS378SSS00 microwave/oven died and I had to replace a line filter (part W10120220) as a capacitor had blown, and a transformer (part 9762053) as the wrapping was bulging. This week both parts failed again after working for over 3 months. I have purchased new parts again but am wondering if additional parts must be replaced. Also the capacitor that is blowing only appears to be rated at 175V (see picture) but the board it is on is getting 240V, and other capacitors are rated at 275V. Is that an issue? Also, what type of capacitor is it, and does the 595 mean 5.9 uF, in which case it is not a ceramic capacitor? Any suggestions will be appreciated. Thanks.

(Pictures below are new capacitor, new filter board, blown capacitor on old filter).
bdpead attached the following image(s):
FilterCap.jpg
FilterNew.jpg
BlownCap.jpg
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
abowden  
#2 Posted : Saturday, January 15, 2011 11:37:18 AM(UTC)
abowden

Rank: Member

Groups: Registered
Joined: 1/15/2011(UTC)
Posts: 4

bdpead, it sounds like you might spend less money getting a new microwave, I just found some microwave oven reviews and ratings HERE i hope this helps.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.