Rank: Member
Groups: Registered
Joined: 9/1/2010(UTC)
Posts: 1
|
Need some detail on how to install replacement light bulb in microwave oven
|
|
|
|
|
|
Rank: Advanced Member
Groups: Moderators
Joined: 7/14/2010(UTC)
Posts: 5,222
Was thanked: 1 time(s) in 1 post(s)
|
Originally Posted by: Roes  Need some detail on how to install replacement light bulb in microwave oven Roes, I take for granted, you mean the oven cavity light, not the cooktop lights. Here is the part number and the instructions from the service manual. Good Luck, :) :) :) Part number: AP4057187
Grille
The top full-width grille is removable for service to some
components, such as: humidity sensor, oven light, door
removal, flame sensor, vent motor capacitor, fuse,
control panel, and stirrer motor (some models).
Grille Removal
1. Disconnect power to oven.
2. Remove screws located in front on top of microwave securing grille 3. Pull outward on the top portion of the grille releasing
the tabs. 4. Reassemble in reverse order.Light Socket
1. Disconnect power to oven.
2. Remove Grille (see "Grille" procedure).
3. Remove screws securing bulb holder.
4. Remove light bulb and socket.
5. Disconnect wire terminal plug. 6. Replace and reassemble in reverse order
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
