Rank: Member
Groups: Registered
Joined: 7/24/2009(UTC)
Posts: 1
|
I spent two hours yesterday night removing the screws on the back panel of my w-m and cleaning the drain hoses.... I need to replace the drain pump, which I just ordered. The drain pump does not look that accessible from the back of the washer: would you advise me to take out the fron casing of the w-m?
Also, there are 3 screws, and given my experience yesterday.... I am wondering whether I need a special screwdriver to remove these 3 screws........ If they do not comne out easily, what would you recommend that I do to help? I do not feel like spending $180 for a repairman to take out 3 screws....... Your advise would be appreciated!
|
|
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert
Joined: 3/29/2009(UTC)
Posts: 11,699
|
Sorry you have not already gotten a reply, but I think the reason is that those of us who respond on this Forum (certainly myself) are just not experienced on this brand. I suggest you try another Forum.
Good luck, sorry not to have been of help.
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 8/20/2010(UTC)
Posts: 3
|
You will need a 2 tort screw drivers one a number t-20 and another t-15. Tilt the machine on its back. Access the pump from the bottom of the machine and it quite easy to replace. You will also need a pliers to remove the clamps around the hoses
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
