Samsung door display problems - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Samsung door display problems Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RS253BABB	Brand: Samsung	Age: 1 - 5 years
Previous Topic Next Topic

Joem88		#1 Posted : Monday, August 23, 2010 2:08:30 AM(UTC)
Rank: Member Groups: Registered Joined: 8/23/2010(UTC) Posts: 6		The door is supposed to display the temp. in the freezer side and the refrig. side but now is flashing an alternating "98" "88" and the number to the right of it is a mirror image of the other number alternating between an "88" and "8" and "backwards 9". None of the 5 buttons affect the display anymore. Also the evap in the fridge side is freezing up. Is it more likely to be low on charge or have a problem with the defroster? Could these problems be related? Is there a way to easily test the heater coil that is supposed to defrost the evaporator?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Joem88		#2 Posted : Monday, August 23, 2010 2:25:16 AM(UTC)
Rank: Member Groups: Registered Joined: 8/23/2010(UTC) Posts: 6		I believe I just fixed it! The wire to the temp sensor is cut for some reason. I repaired the wire and now the screen display works! So I bet that'll fix the freezing evap problem! I'm so happy!


User Profile View All Posts by User View Thanks

Joem88		#3 Posted : Monday, August 23, 2010 3:46:25 AM(UTC)
Rank: Member Groups: Registered Joined: 8/23/2010(UTC) Posts: 6		Now I'm faced with a new problem. I just put everything back together and the compressor never kicks on. I've tried messing with the settings but had no luck. The display shows the fans running but the aren't actually running. Please help!


User Profile View All Posts by User View Thanks

Joem88		#4 Posted : Monday, August 23, 2010 1:07:35 PM(UTC)
Rank: Member Groups: Registered Joined: 8/23/2010(UTC) Posts: 6		I led the fridge unplugged over night and today I plugged it in an it's working fine. I afraid the evap may still freeze up but the display is working. Anyone know why this is working now and wasn't last night?? I plan to check it again after work in about 5 more hours


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close