I replaced the electronic control board and the BIMETL-DEF and the refrigerator is still only getting to 43 degrees on the refrigerators coldest setting with the freezer at the 4 setting which is the recommened factory setting, and the freezer is working fine. The seal is fine sometimes It seals so tight I have to put my fingers between the seal and refrigerator to get the door to open. When I replaced the parts I let the freezer completely defrost and pour HOT water though the drain on the bottom to make sure it was clear. I also checked the space where the cold air flows from the freezer to the refrigerator and it was completly clear. I had a pro come out and check it before I ordered the parts and he told me to order the electronic control board and to replace the BIMETL-DEF just in case. any ideas?

Thanks Gene, the fridge is working great!