dish washer Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: GSD1200G06	Brand: GE	Age: More than 10 years
Previous Topic Next Topic

lsj1402		#1 Posted : Tuesday, September 4, 2007 1:32:05 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2007(UTC) Posts: 3		I have a defective (worn) spray arm. I have never replaced one. can I do it myself or do I have to call a repair company. It seems as though it should be a simple job.
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

Admin / APP Team		#2 Posted : Tuesday, September 4, 2007 2:45:10 PM(UTC)
Rank: Administration Groups: Joined: 7/18/2007(UTC) Posts: 799 Was thanked: 1 time(s) in 1 post(s)		Are you talking about the lower or the upper spray arm?
User Profile View All Posts by User View Thanks

lsj1402		#3 Posted : Tuesday, September 4, 2007 3:40:34 PM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2007(UTC) Posts: 3		The lower spray arm
User Profile View All Posts by User View Thanks

Admin / APP Team		#4 Posted : Wednesday, September 5, 2007 10:34:34 AM(UTC)
Rank: Administration Groups: Joined: 7/18/2007(UTC) Posts: 799 Was thanked: 1 time(s) in 1 post(s)		Click here for diagram. It's pretty simple. Unscrew the 3 piece pop-up kit (#549), unscrew #42, you can then get the spray arm off. Replace in reverse, give the spray arm a test spin by hand and you're done. - Replacement spray arm, if you need it.
User Profile View All Posts by User View Thanks

lsj1402		#5 Posted : Friday, September 7, 2007 4:57:15 AM(UTC)
Rank: Member Groups: Registered Joined: 9/4/2007(UTC) Posts: 3		Thanks for reply. I'm 900 miles from home & will not return until the end of September. I will order the part on the 24 of September so I will get it when I return home . Thanks again PS; Is 3 piece pop-up kit left hand thread or right hand thread. I don't want to break anything.
User Profile View All Posts by User View Thanks

richappy		#6 Posted : Tuesday, September 11, 2007 3:00:13 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		I think on Whirlpool, the 3 piece tower is a left hand thread.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest

Similar Topics

dish washer runs with doo open (Dishwasher Repair) by Guest 4/17/2022 8:59:58 PM(UTC)

Dish washer not cleaning dishes KDTE204EPA1 (Dishwasher Repair) by Guest 12/15/2021 7:24:01 AM(UTC)

correct orientation of plugs on ASKO D3122 anti flood microswitch. dish washer ? (Dishwasher Repair) by turbo1600 8/20/2020 8:16:40 PM(UTC)

Whirlpool dish washer WDF110PABB2 Filling but not washing. (Dishwasher Repair) by KG4MXV 6/15/2018 2:57:20 PM(UTC)

Kitchenaid dish washer leaking from below (Dishwasher Repair) by chrysrobyn 12/19/2016 6:33:56 AM(UTC)

Dish washer stopped and want finish, all lights off (Dishwasher Repair) by b.alford002@comcast.net 8/30/2015 11:17:11 AM(UTC)

How to replace motor bearings on Kitchen Aid KUDSO1FLSS1 dish washer (Dishwasher Repair) by rajfixplumming 3/1/2014 10:33:52 AM(UTC)

Dish washer stops 14 Min in to cycle (Dishwasher Repair) by Wayne_44 2/6/2014 4:55:37 PM(UTC)

Dish washer no lights on panel stopped mid cycle (Dishwasher Repair) by 56Gomer 8/18/2013 6:34:28 AM(UTC)

dish washer (Dishwasher Repair) by poloman 8/5/2013 9:38:22 AM(UTC)

dish washer (Dishwasher Repair) by poloman 8/5/2013 9:34:27 AM(UTC)

Dish Washer (Dishwasher Repair) by jobronie 7/25/2013 3:42:51 PM(UTC)

dish washer (Dishwasher Repair) by everettwayne 6/19/2013 8:19:55 AM(UTC)

Dish washer won't dispense water. (Dishwasher Repair) by Tom Loszchuk 4/2/2013 5:52:22 PM(UTC)

GE Dish Washer Stops midcycle (Dishwasher Repair) by mwpresnell 2/8/2013 8:41:24 AM(UTC)