Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
DON,t Work
Options
Go to last post Go to first unread
Brand: GE Age: Less than 1 year
Previous Topic Next Topic
Bruce 42  
#1 Posted : Tuesday, March 16, 2010 10:30:37 AM(UTC)
Bruce 42

Rank: Member

Groups: Registered
Joined: 3/16/2010(UTC)
Posts: 1
I bought a new GE microwave and some one turned it on during construction with just the directionsin it which burned up the directions and now it will not run I want to know if there is a reset button or any sugestions? Thanks Bruce
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
bargainsbob  
#2 Posted : Tuesday, March 16, 2010 1:59:00 PM(UTC)
bargainsbob

Rank: Member

Groups: Registered
Joined: 3/16/2010(UTC)
Posts: 3
If it is totally dead the fuse is probably blown. If not it is most likely the hv diode, or (door switch). Which I found it bad on mine today, but it was a 1999 vintage unit. If the fuse is good it should act normally but the fan and growl of the HV TRANSFORMER WILL BE ABSENT when trying to cook.
Back to top
bargainsbob  
#3 Posted : Tuesday, March 16, 2010 1:59:56 PM(UTC)
bargainsbob

Rank: Member

Groups: Registered
Joined: 3/16/2010(UTC)
Posts: 3
If it is totally dead the fuse is probably blown. If not it is most likely the hv diode, or (door switch). Which I found it bad on mine today, but it was a 1999 vintage unit. If the fuse is good it should act normally but the fan and growl of the HV TRANSFORMER WILL BE ABSENT when trying to cook.
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET