Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
dryer blows cold air won't advance through cycle
Options
Go to last post Go to first unread
Model: LER4634JQ1 Brand: Whirlpool Age: 5 - 10 years
Previous Topic Next Topic
sandra626  
#1 Posted : Sunday, February 3, 2008 3:04:56 PM(UTC)
sandra626

Rank: Member

Groups: Registered
Joined: 2/3/2008(UTC)
Posts: 2
My Dryer Won't Advance Through The Cycle And It Blows Cold Air Only, Could The Element Cause This? Or Could It Be The Timer Too?
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
sandra626  
#2 Posted : Sunday, February 3, 2008 3:06:57 PM(UTC)
sandra626

Rank: Member

Groups: Registered
Joined: 2/3/2008(UTC)
Posts: 2
Its A Whirlpool Electric Dryer That Won't Advance And It Blows Cold Air
Back to top
MISTYLE  
#3 Posted : Monday, February 4, 2008 8:53:57 AM(UTC)
MISTYLE

Rank: Member

Groups: Registered
Joined: 2/4/2008(UTC)
Posts: 2
My Whirlpool Dryer is doing the same thing, It doesn't cool and the Timer / Cycle button stays in the same position. I'm checking around the internet today and if i find out anything I'll let ya know.

Good luck!
Back to top
MISTYLE  
#4 Posted : Monday, February 4, 2008 9:21:24 AM(UTC)
MISTYLE

Rank: Member

Groups: Registered
Joined: 2/4/2008(UTC)
Posts: 2
I found this site and it helped me out a lot. Maybe your problem is listed here :confused: .

http://www.appliance411.com/links/jump.cgi?ID=457

I found www.appliance411.com , (the link above) from Home Improvement - Do It Yourself - Home Remodeling | BobVila.com .


Thanks and good luck to you.
Misty
Back to top
Gene  
#5 Posted : Tuesday, February 5, 2008 9:49:12 AM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Sandra,

Most likely there is a problem with the heating circuit.

It consists of four major parts:

1. Thermal cut off (#6 on the bulkhead parts break down diagram)
2. Operating (cycling) thermostat (#20 on the bulkhead parts break down diagram)
3. Hi limit thermostat (#15 on the bulkhead parts break down diagram)
4. Heating element (#17 on the bulkhead parts break down diagram)

To find out which part caused the problem you have to check them for continuity in the above sequence.

If any of them is open - it has to be replaced.

The following article on our forum will explain in detail how to run a continuity test using either an analog meter or a digital meter - How To Check Continuity With Ohmmeter

- The part number for the thermal cut off is AP3094244

- The part number for the cycling thermostat is AP3131939

- The part number for the hi limit thermostat is AP3131941

- The part number for the heating element is AP3094254

Here are the break down diagrams for the Whirlpool dryer Model LER4634JQ1

Good luck.
Gene.
Back to top
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET