2 Pages12> Go to Page...

Amana sporatic ignitors Options  Email this topic  Watch this topic  Print this topic » Normal Threaded
Model: ARG7300WW	Brand: Amana	Age: 1 - 5 years
Previous Topic Next Topic

4gonzo		#1 Posted : Tuesday, October 13, 2009 7:27:50 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2009(UTC) Posts: 6		L/H front and R/H rear ignitors fire about 7 times out of 50 system discharge cycles. Very dangerous. Valves are opening and easily lit with a lighter. Do I replace the ignitors or the ignition module?
User Profile View All Posts by User View Thanks

Sponsor
	See inside of your appliance - diagrams and part photos for virtually every model. By Model Number By Part Description By Part Number powered by AppliancePartsPros.com

magician59		#2 Posted : Tuesday, October 13, 2009 8:43:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Remove the diffusers and make sure they're clean. Then, clean the igniter electrodes with a wire brush. If that doesn't do the job, replace the igniters.
User Profile View All Posts by User View Thanks

4gonzo		#3 Posted : Tuesday, October 13, 2009 8:49:05 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2009(UTC) Posts: 6		Originally Posted by: magician59 Remove the diffusers and make sure they're clean. Then, clean the igniter electrodes with a wire brush. If that doesn't do the job, replace the igniters. Diffusers?
User Profile View All Posts by User View Thanks

magician59		#4 Posted : Tuesday, October 13, 2009 9:25:33 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		The smaller cover plates over the burner. Sometimes they get dirty and deflect the gas away from the igniters.
User Profile View All Posts by User View Thanks

4gonzo		#5 Posted : Tuesday, October 13, 2009 9:53:07 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2009(UTC) Posts: 6		Thanks, I was not sure what you meant. As stated in my first question, the L/H Fwd and R/H rear ignitors are sparking sporadically. This is verified by visual observance.(The other two work perfect). I have cleaned the tips with a red Scotchbrite pad and it made no difference. Once lit by a lighter and used for a while, I can turn it off and it will start much sooner, but not like it should. What do you think?
User Profile View All Posts by User View Thanks

magician59		#6 Posted : Tuesday, October 13, 2009 10:37:18 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Either eroding igniters or failing spark module.
User Profile View All Posts by User View Thanks

4gonzo		#7 Posted : Tuesday, October 13, 2009 10:55:01 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2009(UTC) Posts: 6		Do the L/H fwd and the R/H rear ignitors share the same output from the ignition module? If they get their charge separate (4 outputs), I will try ignitors. If the module is split for dual outputs (2+2), I will try a module. Do you agree?
User Profile View All Posts by User View Thanks

magician59		#8 Posted : Tuesday, October 13, 2009 11:47:40 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		What I would do is swap them with the two that you know work well. If you experience the same problem, the trouble is in the module. If they work, the problem is the igniters. This is a little bit of work, but it will save you from needless purchase of parts.
User Profile View All Posts by User View Thanks

4gonzo		#9 Posted : Tuesday, October 13, 2009 11:52:47 AM(UTC)
Rank: Member Groups: Registered Joined: 10/13/2009(UTC) Posts: 6		Will Do! Thanks!!
User Profile View All Posts by User View Thanks

magician59		#10 Posted : Tuesday, October 13, 2009 11:54:34 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 8/16/2007(UTC) Posts: 3,273		Let me know how it goes.
User Profile View All Posts by User View Thanks

Users browsing this topic

Guest (2)

2 Pages12> Go to Page...