Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

2 Pages<12
Options
Go to last post Go to first unread
nafpic  
#11 Posted : Tuesday, May 27, 2008 10:25:35 AM(UTC)
nafpic

Rank: Member

Groups: Registered
Joined: 5/16/2008(UTC)
Posts: 5

I just wanted to clarify what the problem is. The oven turns on by itself. I thought that opening the oven would cause the oven to stop. that didn't work. The only way that I could get the oven to shut off was by pulling out the plug. It has happened twice so far in the last 3 months. It does seem to happen soon after the oven has been used.
rbinthesouth  
#12 Posted : Thursday, October 8, 2009 9:28:58 AM(UTC)
rbinthesouth

Rank: Member

Groups: Registered
Joined: 10/8/2009(UTC)
Posts: 4

I also have a ge profile space saver that started turning on by itself and within a couple of weeks never shut off. Actually only the fans would stay on. The microwave itself wasn't running. The vent door will not open unless the microwave is running. The microwave vents to the front into the house. The profile vpm1870sm1ss isn't on the recall list. Is replacing the magnetron something that I can do on my own? I have no experience with appliances. Also, when replacing the magnetron do I have to worry about discharging the capacitor?
Gene  
#13 Posted : Thursday, October 8, 2009 12:14:40 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
This problem has nothing to do with the magnetron. It can be a shorted interlock switch or a bad control board. The model number you posted is incorrect. Verify and repost it.

Gene.
rbinthesouth  
#14 Posted : Thursday, October 8, 2009 3:42:51 PM(UTC)
rbinthesouth

Rank: Member

Groups: Registered
Joined: 10/8/2009(UTC)
Posts: 4

Originally Posted by: Gene Go to Quoted Post
This problem has nothing to do with the magnetron. It can be a shorted interlock switch or a bad control board. The model number you posted is incorrect. Verify and repost it.

Gene.


Sorry about the model number. It is PVM1870SM1SS
Gene  
#15 Posted : Thursday, October 8, 2009 4:14:36 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Remove the top grill and open the control panel. Check the door switches (#67 on the diagram).

If there is nothing wrong then replace the control board.

- The door switch Part number: AP2024337
Part number: AP2024337



- The control board Part number: AP4343852
Part number: AP4343852


Gene.
AChristoff  
#16 Posted : Saturday, November 27, 2010 11:02:43 AM(UTC)
AChristoff

Rank: Member

Groups: Registered
Joined: 11/27/2010(UTC)
Posts: 2

This has happened with our GE Turntable Microwave Oven as well. We have had it for over a year. Just 2 days ago, it would beep, and show the number "3.5" in the LED display, then turn on spontaneously and run for 2 minutes, displaying the 2 minute time in the LED. Opening the door would stop it, but the keypad had become inoperative. We replaced it with a new, identical unit, but it did exactly the same thing! Using a surge protector did not help. I could find no mention of a recall of our unit on the GE site, but I did leave a message with them stating the urgency of the situation, and that I felt it was a potential fire hazard.

A Christoff
Gene  
#17 Posted : Monday, November 29, 2010 12:49:13 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Which part exactly did you replace?

What is the complete moiled number of the microwave?

Gene.
AChristoff  
#18 Posted : Tuesday, November 30, 2010 5:23:42 PM(UTC)
AChristoff

Rank: Member

Groups: Registered
Joined: 11/27/2010(UTC)
Posts: 2

Gene-

We replaced the entire oven, not a specific part. What exactly is a "moiled" number?
Gene  
#19 Posted : Tuesday, November 30, 2010 8:27:00 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sorry for a typo. I meant "model".

If this is a brand new unit then GE must come over and diagnose the problem.

Gene.
Users browsing this topic
Guest (8)
2 Pages<12
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.