Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jeffo  
#1 Posted : Thursday, January 31, 2008 4:15:10 AM(UTC)
Jeffo

Rank: Member

Groups: Registered
Joined: 1/31/2008(UTC)
Posts: 2

I overfilled my 7 year old washing machine last night and I noticed later that it sounded like it was struggling; then I noticed that it smelled hot. I stopped it, emptied most of the clothing out, and resumed. It seemed to work fine. When I put in the clothing I had removed to rewash it stopped again (I admit there was still a lot in this second load); I did not smell the hot smell, though. I stopped it, unplugged it, left it unplugged for over 30 minutes, then tried it again; just to empty the water out though. I did not have clothing in it. It still clicked. I left it off all night, unplugged, and tried again. It ran for maybe 20 to 30 seconds this morning sounding like it should. I thought it was okay, but then it started clicking again. Is the motor burned out? Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
richappy  
#2 Posted : Thursday, January 31, 2008 5:50:09 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
It's common for the low speed winding to burn out on the motor, you might want to run it on high speed only to see if it's ok there, otherwise= new motor time.
Jeffo  
#3 Posted : Thursday, January 31, 2008 5:52:25 AM(UTC)
Jeffo

Rank: Member

Groups: Registered
Joined: 1/31/2008(UTC)
Posts: 2

Thank you- any idea how much a new motor will cost, roughly (of course). Also, I guess we could just always run it on high speed if it is just the low speed that is burned out? Or would that be a problem? Thank you again!
richappy  
#4 Posted : Thursday, January 31, 2008 7:18:37 AM(UTC)
richappy

Rank: Advanced Member

Groups: Senior Expert
Joined: 9/10/2007(UTC)
Posts: 9,586

Was thanked: 2 time(s) in 2 post(s)
A new motor comes as a kit, around $300, money better spent on a new washer, like a Whirlpool direct drive.
For your model # maybe less for the exact one.
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.