Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
dlaudens  
#1 Posted : Monday, July 6, 2009 6:42:01 AM(UTC)
dlaudens

Rank: Member

Groups: Registered
Joined: 7/6/2009(UTC)
Posts: 3

Just recently, my Frigidaire dishwasher is not cleaning the dishes. Washing arms are moving, water temp is hot. Pulled out the trap around the lower arm and removed some gunk but still no luck. Are there more areas I should be looking at for clogs? Any help is appreciated. Also, what is the life expectancy of a dishwasher? Think this one is getting close to 10 yrs old.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Gene  
#2 Posted : Monday, July 6, 2009 5:27:43 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: dlaudens Go to Quoted Post
Just recently, my Frigidaire dishwasher is not cleaning the dishes. Washing arms are moving, water temp is hot. Pulled out the trap around the lower arm and removed some gunk but still no luck. Are there more areas I should be looking at for clogs? Any help is appreciated. Also, what is the life expectancy of a dishwasher? Think this one is getting close to 10 yrs old.


The model number you posted does not come up. Verify and repost it.

Gene.
Gene  
#3 Posted : Monday, July 6, 2009 5:31:49 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Originally Posted by: Hector58 Go to Quoted Post
Same happening to me . I suspect is the Dispenser actuator . I checked the solenoid and power is coming at different cycles but actuator does not move. (This the solenoid that open the detergent door)
The problem now is I can't find the part. Have checked out by different methods and only showed for Whirlpool not Frigidare.

email me if you find the part
Hector


Hector,

Looks like your question is regarding a washer problem. It's better if you'll open a new thread in "Washer repair" section and post the complete model number of the washer and full description on the problem.

Gene.
Gene  
#4 Posted : Monday, July 6, 2009 6:46:13 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The model number you posted is incomplete. The link you posted is for the Whirlpool Duet Washer dispenser actuator assembly.

Quote:
I suspect is the Dispenser actuator



Gene.
dlaudens  
#5 Posted : Tuesday, July 7, 2009 6:36:19 PM(UTC)
dlaudens

Rank: Member

Groups: Registered
Joined: 7/6/2009(UTC)
Posts: 3

Gene:

Here is the model # from the label on the Tub.
FDB710LCB0
Serial # TH41722080

Thanks, Dave
Gene  
#6 Posted : Tuesday, July 7, 2009 9:12:37 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Dave,

Quote:
...Washing arms are moving...


Are they moving under the water pressure or when you turned them manually?


Can you hear the wash pump running when it comes to the wash cycle?

What is the water level inside the dishwasher?

Gene.
dlaudens  
#7 Posted : Wednesday, July 8, 2009 2:58:44 PM(UTC)
dlaudens

Rank: Member

Groups: Registered
Joined: 7/6/2009(UTC)
Posts: 3

Moving under water pressure and can hear the water pump running. Water is being sprayed to top rack. Water level is appx 1/8" if I measure near the heater bar/element and 3/4 to 1" in the center.

The water is lukewarm during the first part of the wash cycle. When it progresses and goes past 'light wash' then it is a little warmer. Heating element is cold during first phase but hot during second. Didn't know if it should be hot for both.
Users browsing this topic
Guest (7)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.